491 research outputs found

    Comparison of different POS tagging techniques for some South Asian languages

    Get PDF
    This thesis report is submitted in partial fulfillment of the requirements for the degree of Bachelor of Science in Computer Science and Engineering, 2006.Cataloged from PDF version of thesis report.Includes bibliographical references (page 47).There are different approaches to the problem of assigning a part of speech (POS) tag to each word of a natural language sentence. We present a comparison of the different approaches of POS tagging for the Bangla language and two other South Asian languages, as well as the baseline performances of different POS tagging techniques for the English language. The most widely used methods for English are the statistical methods i.e. n-gram based tagging or Hidden Markov Model (HMM) based tagging, the rule based or transformation based methods i.e. Brill’s tagger. Subsequent researches add various modifications to these basic approaches to improve the performance of the taggers for English. Here, we present an elaborate review of previous work in the area with the focus on South Asian Languages such as Hindi and Bangla. We experiment with Brill’s transformation based tagger and the supervised HMM based tagger without modifications for added improvement in accuracy, on English using training corpora of different sizes from the Brown corpus. We also compare the performances of these taggers on three South Asian languages with the focus on Bangla using two different tagsets and corpora of different sizes, which reveals that Brill's transformation based tagger performs considerably well for South Asian languages. We also check the baseline performances of the taggers for English and try to conclude how these approaches might perform if we use a considerable amount of annotated training corpus.Fahim Muhammad HasanB. Computer Science and Engineerin

    Comparion of different POS tagging technique (N-Gram, HMM and Brill's tagger) for Bangla

    Get PDF
    Includes bibliographical references (page 6-7).There are different approaches to the problem of assigning each word of a text with a parts-of-speech tag, which is known as Part-Of-Speech (POS) tagging. In this paper we compare the performance of a few POS tagging techniques for Bangla language, e.g. statistical approach (n-gram, HMM) and transformation based approach (Brill’s tagger). A supervised POS tagging approach requires a large amount of annotated training corpus to tag properly. At this initial stage of POS-tagging for Bangla, we have very limited resource of annotated corpus. We tried to see which technique maximizes the performance with this limited resource. We also checked the performance for English and tried to conclude how these techniques might perform if we can manage a substantial amount of annotated corpus.Naushad UzZamanFahim Muhammad HasanMumit Kha

    Impact Of Metacognitive Awareness On Performance Of Students In Chemistry

    Get PDF
    The impact of metacognitive awareness on students’ performance has been examined in the present study. 900 students of grade X participated in the study.  Metacognitive awareness was measured using inventory, while performance of students was measured with the help of researcher made test in the subject of chemistry.  Results indicated that metacognitive awareness was significantly correlated with the performance of students.  The highly metacognitively aware science students performed well on the test.  Results further indicated that there was no significant difference in the metacognitive awareness of male and female students. &nbsp

    Fuzz, Penetration, and AI Testing for SoC Security Verification: Challenges and Solutions

    Get PDF
    The ever-increasing usage and application of system-on-chips (SoCs) has resulted in the tremendous modernization of these architectures. For a modern SoC design, with the inclusion of numerous complex and heterogeneous intellectual properties (IPs), and its privacy-preserving declaration, there exists a wide variety of highly sensitive assets. These assets must be protected from any unauthorized access and against a diverse set of attacks. Attacks for obtaining such assets could be accomplished through different sources, including malicious IPs, malicious or vulnerable firmware/software, unreliable and insecure interconnection and communication protocol, and side-channel vulnerabilities through power/performance profiles. Any unauthorized access to such highly sensitive assets may result in either a breach of company secrets for original equipment manufactures (OEM) or identity theft for the end-user. Unlike the enormous advances in functional testing and verification of the SoC architecture, security verification is still on the rise, and little endeavor has been carried out by academia and industry. Unfortunately, there exists a huge gap between the modernization of the SoC architectures and their security verification approaches. With the lack of automated SoC security verification in modern electronic design automation (EDA) tools, we provide a comprehensive overview of the requirements that must be realized as the fundamentals of the SoC security verification process in this paper. By reviewing these requirements, including the creation of a unified language for SoC security verification, the definition of security policies, formulation of the security verification, etc., we put forward a realization of the utilization of self-refinement techniques, such as fuzz, penetration, and AI testing, for security verification purposes. We evaluate all the challenges and resolution possibilities, and we provide the potential approaches for the realization of SoC security verification via these self-refinement techniques

    Conductive textiles for signal sensing and technical applications

    Get PDF
    Conductive textiles have found notable applications as electrodes and sensors capable of detecting biosignals like the electrocardiogram (ECG), electrogastrogram (EGG), electroencephalogram (EEG), and electromyogram (EMG), etc; other applications include electromagnetic shielding, supercapacitors, and soft robotics. There are several classes of materials that impart conductivity, including polymers, metals, and non-metals. The most significant materials are Polypyrrole (PPy), Polyaniline (PANI), Poly(3,4-ethylenedioxythiophene) (PEDOT), carbon, and metallic nanoparticles. The processes of making conductive textiles include various deposition methods, polymerization, coating, and printing. The parameters, such as conductivity and electromagnetic shielding, are prerequisites that set the benchmark for the performance of conductive textile materials. This review paper focuses on the raw materials that are used for conductive textiles, various approaches that impart conductivity, the fabrication of conductive materials, testing methods of electrical parameters, and key technical applications, challenges, and future potential

    Antimicrobial resistance among migrants in Europe: a systematic review and meta-analysis

    Get PDF
    BACKGROUND: Rates of antimicrobial resistance (AMR) are rising globally and there is concern that increased migration is contributing to the burden of antibiotic resistance in Europe. However, the effect of migration on the burden of AMR in Europe has not yet been comprehensively examined. Therefore, we did a systematic review and meta-analysis to identify and synthesise data for AMR carriage or infection in migrants to Europe to examine differences in patterns of AMR across migrant groups and in different settings. METHODS: For this systematic review and meta-analysis, we searched MEDLINE, Embase, PubMed, and Scopus with no language restrictions from Jan 1, 2000, to Jan 18, 2017, for primary data from observational studies reporting antibacterial resistance in common bacterial pathogens among migrants to 21 European Union-15 and European Economic Area countries. To be eligible for inclusion, studies had to report data on carriage or infection with laboratory-confirmed antibiotic-resistant organisms in migrant populations. We extracted data from eligible studies and assessed quality using piloted, standardised forms. We did not examine drug resistance in tuberculosis and excluded articles solely reporting on this parameter. We also excluded articles in which migrant status was determined by ethnicity, country of birth of participants' parents, or was not defined, and articles in which data were not disaggregated by migrant status. Outcomes were carriage of or infection with antibiotic-resistant organisms. We used random-effects models to calculate the pooled prevalence of each outcome. The study protocol is registered with PROSPERO, number CRD42016043681. FINDINGS: We identified 2274 articles, of which 23 observational studies reporting on antibiotic resistance in 2319 migrants were included. The pooled prevalence of any AMR carriage or AMR infection in migrants was 25·4% (95% CI 19·1-31·8; I2 =98%), including meticillin-resistant Staphylococcus aureus (7·8%, 4·8-10·7; I2 =92%) and antibiotic-resistant Gram-negative bacteria (27·2%, 17·6-36·8; I2 =94%). The pooled prevalence of any AMR carriage or infection was higher in refugees and asylum seekers (33·0%, 18·3-47·6; I2 =98%) than in other migrant groups (6·6%, 1·8-11·3; I2 =92%). The pooled prevalence of antibiotic-resistant organisms was slightly higher in high-migrant community settings (33·1%, 11·1-55·1; I2 =96%) than in migrants in hospitals (24·3%, 16·1-32·6; I2 =98%). We did not find evidence of high rates of transmission of AMR from migrant to host populations. INTERPRETATION: Migrants are exposed to conditions favouring the emergence of drug resistance during transit and in host countries in Europe. Increased antibiotic resistance among refugees and asylum seekers and in high-migrant community settings (such as refugee camps and detention facilities) highlights the need for improved living conditions, access to health care, and initiatives to facilitate detection of and appropriate high-quality treatment for antibiotic-resistant infections during transit and in host countries. Protocols for the prevention and control of infection and for antibiotic surveillance need to be integrated in all aspects of health care, which should be accessible for all migrant groups, and should target determinants of AMR before, during, and after migration. FUNDING: UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College Healthcare Charity, the Wellcome Trust, and UK National Institute for Health Research Health Protection Research Unit in Healthcare-associated Infections and Antimictobial Resistance at Imperial College London

    Surgical site infection after gastrointestinal surgery in high-income, middle-income, and low-income countries: a prospective, international, multicentre cohort study

    Get PDF
    Background: Surgical site infection (SSI) is one of the most common infections associated with health care, but its importance as a global health priority is not fully understood. We quantified the burden of SSI after gastrointestinal surgery in countries in all parts of the world. Methods: This international, prospective, multicentre cohort study included consecutive patients undergoing elective or emergency gastrointestinal resection within 2-week time periods at any health-care facility in any country. Countries with participating centres were stratified into high-income, middle-income, and low-income groups according to the UN's Human Development Index (HDI). Data variables from the GlobalSurg 1 study and other studies that have been found to affect the likelihood of SSI were entered into risk adjustment models. The primary outcome measure was the 30-day SSI incidence (defined by US Centers for Disease Control and Prevention criteria for superficial and deep incisional SSI). Relationships with explanatory variables were examined using Bayesian multilevel logistic regression models. This trial is registered with ClinicalTrials.gov, number NCT02662231. Findings: Between Jan 4, 2016, and July 31, 2016, 13 265 records were submitted for analysis. 12 539 patients from 343 hospitals in 66 countries were included. 7339 (58·5%) patient were from high-HDI countries (193 hospitals in 30 countries), 3918 (31·2%) patients were from middle-HDI countries (82 hospitals in 18 countries), and 1282 (10·2%) patients were from low-HDI countries (68 hospitals in 18 countries). In total, 1538 (12·3%) patients had SSI within 30 days of surgery. The incidence of SSI varied between countries with high (691 [9·4%] of 7339 patients), middle (549 [14·0%] of 3918 patients), and low (298 [23·2%] of 1282) HDI (p < 0·001). The highest SSI incidence in each HDI group was after dirty surgery (102 [17·8%] of 574 patients in high-HDI countries; 74 [31·4%] of 236 patients in middle-HDI countries; 72 [39·8%] of 181 patients in low-HDI countries). Following risk factor adjustment, patients in low-HDI countries were at greatest risk of SSI (adjusted odds ratio 1·60, 95% credible interval 1·05–2·37; p=0·030). 132 (21·6%) of 610 patients with an SSI and a microbiology culture result had an infection that was resistant to the prophylactic antibiotic used. Resistant infections were detected in 49 (16·6%) of 295 patients in high-HDI countries, in 37 (19·8%) of 187 patients in middle-HDI countries, and in 46 (35·9%) of 128 patients in low-HDI countries (p < 0·001). Interpretation: Countries with a low HDI carry a disproportionately greater burden of SSI than countries with a middle or high HDI and might have higher rates of antibiotic resistance. In view of WHO recommendations on SSI prevention that highlight the absence of high-quality interventional research, urgent, pragmatic, randomised trials based in LMICs are needed to assess measures aiming to reduce this preventable complication

    Optimasi Portofolio Resiko Menggunakan Model Markowitz MVO Dikaitkan dengan Keterbatasan Manusia dalam Memprediksi Masa Depan dalam Perspektif Al-Qur`an

    Full text link
    Risk portfolio on modern finance has become increasingly technical, requiring the use of sophisticated mathematical tools in both research and practice. Since companies cannot insure themselves completely against risk, as human incompetence in predicting the future precisely that written in Al-Quran surah Luqman verse 34, they have to manage it to yield an optimal portfolio. The objective here is to minimize the variance among all portfolios, or alternatively, to maximize expected return among all portfolios that has at least a certain expected return. Furthermore, this study focuses on optimizing risk portfolio so called Markowitz MVO (Mean-Variance Optimization). Some theoretical frameworks for analysis are arithmetic mean, geometric mean, variance, covariance, linear programming, and quadratic programming. Moreover, finding a minimum variance portfolio produces a convex quadratic programming, that is minimizing the objective function ðð¥with constraintsð ð 𥠥 ðandð´ð¥ = ð. The outcome of this research is the solution of optimal risk portofolio in some investments that could be finished smoothly using MATLAB R2007b software together with its graphic analysis

    Juxtaposing BTE and ATE – on the role of the European insurance industry in funding civil litigation

    Get PDF
    One of the ways in which legal services are financed, and indeed shaped, is through private insurance arrangement. Two contrasting types of legal expenses insurance contracts (LEI) seem to dominate in Europe: before the event (BTE) and after the event (ATE) legal expenses insurance. Notwithstanding institutional differences between different legal systems, BTE and ATE insurance arrangements may be instrumental if government policy is geared towards strengthening a market-oriented system of financing access to justice for individuals and business. At the same time, emphasizing the role of a private industry as a keeper of the gates to justice raises issues of accountability and transparency, not readily reconcilable with demands of competition. Moreover, multiple actors (clients, lawyers, courts, insurers) are involved, causing behavioural dynamics which are not easily predicted or influenced. Against this background, this paper looks into BTE and ATE arrangements by analysing the particularities of BTE and ATE arrangements currently available in some European jurisdictions and by painting a picture of their respective markets and legal contexts. This allows for some reflection on the performance of BTE and ATE providers as both financiers and keepers. Two issues emerge from the analysis that are worthy of some further reflection. Firstly, there is the problematic long-term sustainability of some ATE products. Secondly, the challenges faced by policymakers that would like to nudge consumers into voluntarily taking out BTE LEI
    corecore